DIESEL INJECTOR COMPRESSION TESTER

Manometer: 0-1000psi / 0-70bar

Adaptadors: (3x) Injector adapters: M18x1.5, M24x2.0, M24x1.5, (4x) adaptors for glowplugs: M10x1.0, (2x) M10x1.25, M12x1.5

Instructions:
•The manometer tester is a instrument to measure the hightest pressure the compression strock raised in the air cylinder of diesel engine
•The manometer tester has a lot of whorls for different specifications an angle attachments, which can measure the different types of diesel engines
•Select the right attachment to link up the engine and the instrument in the use of measurement. When the compressed gas in the air cylinder enters the indicated part through every connected parts, the indicator rotate, and stroke over, so the position that indicator stay indicate the maximum figure of pressure raised by this stroke. Then wire the figure down, push the exhouse button to exhaust the compressed gas, and the indicator come back to the “zero”
•In order to lengthen the service life of the machine, please make sure the working pressure is unsuitable to go beyond 70% of the upper limit during the measurement.
•Make sure the machine away from fierce vibration and collision