3TON FLOOR HYDRAULIC SCISSOR LIFT 220V
Ref: 9815M
Characteristics:
Driving mode: Electrical hydraulic
Supported weight: 3T
Lifting height: 1950mm
Initial height platform: 100mm
Platform length: 1420mm
Platform width: 650mm
Climb time: ≤50s
Descent time: ≤60s
Total length: 2010mm
Total width: 2200mm
Weight: 885kg
AC voltage: 220V
Power: 2.2kw
Hydraulic oil: 18L
Operating temperature: 5-40 ℃
Work Humidity: 30-95%
Noise: <76db
Frame temperature: -25 ℃ ~ 55 ℃
Installation location: Indoor
Description:
• This lift can lift each kind of vehicle whose weight is less than 3000kg
• Is suitable for use in vehicle tests, maintenance, and caring for automobiles, which is particularly suitable for use in the basement or on the floor, without construction and hole
• Use hidden and thin scissor structure, dispense with construction and ground hole, the occupation is small
• Independent control box, low-voltage controlling, good security
• Hydraulic cubage and in-phase cylinder, the synchronization of platform
• Own the safety equipment of hydraulic lock
• Own protection of safety valve and burst-proof equipment for hydraulic failure and over loading
• So when the oil pipe bursts, the machine will not fall quickly
• Own manual lowering operation when the power is cut, and the manual pump is prepared by the user
NOTE: Compatible with rubber Ref: 981015B18040 and by rubber Ref: 981015B18080
Packaging dimensions:
Description | Packaged | Length | Width | Height | M3 | N.W. (KG) | G.W. (KG) | |
Platform, ramp , hose cover, accessory | 1/2 | Steel Fame | 1,68 | 0,7 | 0,45 | 0,51 | 847 | 900 |
Control Box | 2/2 | Steel Fame | 0,47 | 0,3 | 1,05 | 0,15 | 38 | 50 |
EXP: Unidades / Lojas: