1. Garage Equipment

JACK STAND 6TON

Ref: 4856

Characteristics:
Capacity: 6 ton
Minimum height: 408mm
Maximum height: 600mm
Base dimension: 274x240mm

Operation:
1- Refer to your vehicle owner’s manual for proper jacking lift point. This area of the vehicle is specified by vehicle manufacturer
2- Positions stands under vehicle at points specified by vehicle manufacturer as proper load support points
3- To adjust stands hold control level up while lifting saddle just to desired height. Push the control lever down to lock pawl into teeth located in center column. Make sure pawl is fully engaged into teeth
4- Carefully lower load onto stands. WARNING! Set both jack stands to the same height

Maintenance and inspeciton
1- Visual inspection shall be made before using the stands. Check the cracked welds and missing and/or damaged parts. A stand that appears to be damaged must be removed from service immediately
2- Do not use jack stands as a long-term stand for the vehicle. Use them only while making repairs, then immediately lower vehicle to the ground

EXP: Unidades / Lojas:

Please enter quantity
Please select material
There are only {QTD} products in stock.
There are only {QTD} products with immediate stock
Product currently out of stock

Size

Price

Discount

Subtotal

6T

89,90 EUR

0,00 EUR

0,00 EUR

The values shown add VAT

Added

Notify me when available
Available only for registered customers. Sign in
  • JACK STAND 6TON
  • JACK STAND 6TON